MASTERCRAFT REPLACEMENT BALLAST PUMP JABSCO OEM

• Jabsco designed this pump specifically for MasterCraft Boat Company to meet the high-flow, continuously rated, demands that their wakesurfing,wakeboarding, and ski boats require ballast pumping.
• This pump is equipped with the same wire protection and heavy duty disconnect wire connector as the MasterCraft ballast pump 300249.
• 8.4 GPM (at 10 feet of head)
• 12 Volt DC Operation
• 20 Amp fuse recommended
• Rated for continuous duty
• Self-Priming up to 8 feet
• Outside of ports accept 1 Inch inside diameter hose
• Ports feature 1/2 inch female NPT
• For best results use with 1 inch inside diameter hose. Do not use with hose that has an inside diameter smaller than 3/4 Inch.
• 7-1/8″ Long x 4-3/4″ Wide x 3-1/2″ High
• Ignition Protected: Complies with USCG 183.410 and ISO 8846
• Complies with ISO 8849 bilge pump standards
• Debris presents no problem to this bronze bodied, flexible impeller design
• Equipped with a green Run Dry Impeller (6303-0007-P)
• Equipped with the same wire protection and heavy duty disconnect wire connector as MasterCraft ballast pump 300249
• Direct plug and play replacement for MasterCraft 300249