1-1/8″ X 5″ A.R.E Inboard Shaft System With Inverted 5″ Face Diameter Hurth Steel Coupler Dual Taper

• Shaft length is 52.250 Long

• Assembled Length with coupler seated from inside face of flange is 50.00″

• 1-1/8″ Shaft Diameter
  

• 5″ Coupler Face Diameter Steel Coupler Hurth Reversed Coupler

System Drive Shaft Complete – Includes, shaft, coupler, keys, set screws, nut and cotter pins.

Notice! – When you aremeasuring the assembled lengthof your shaft, be very sure to measure from theface of the coupler flange,while it is seated on the shaft, to theend of the shaftasshown in the picturesplease.

System Drive Shaft. The patented A.R.E. System is a double-taper drive shaft and coupling setup designed to greatly reduce the time and effort needed to remove and replace drive shafts. When used with tools developed by A.R.E. for drive train maintenance, the System typically cuts installation time in half.