Exhaust Hose Corrugated With Wire 3-1/2″ Inside Diameter

3.5″ I.D. Shield’s Brand ExoflexSold per foot

Example – Enter quantity of 5 for one continuous five foot piece etc.

Great for tight radius applications. Over a 20 bend.

• Shields Exoflex corrugated marine exhaust/water hose
• Ideal for connections in wet exhaust systems where bends are necessary
• Applications include engine water intake, wet exhaust connections, bilge pump intake/discharge, scupper drain, toilet intake/discharge, and holding tank vent/pump out
• Hose is supported by an outer double wire helix imbedded between the hose plies
• Constructed of black, thick-walled synthetic rubber
• 2 plies of synthetic cord
• Formulated to resist engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, and salt water
• -20F to +200F continuous operating temperature range, +250F intermittent
• Bend radius is 4 x the hose ID
• SAE J2006 Type R2 rating
• Lloyd’s Register Type Approval
• Replaces Sierra 116-252-3120

Sold per foot.

Features a corrugated exterior and is internally reinforced by wire to prevent hose from collapsing. Primarily used for connections in marine wet exhaust and engine water circulation applications, especially where significant bends of hose are required. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater

Compounded to resist engine heat, exhaust fumes, and salt water.